Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
2 From 2
No results were found for the filter!
Saw Arbor Motor-2.2kW-KSE 63B2-Rotation left Saw Arbor Motor-2.2kW-KSE 63B2-Rotation left
Single-phase saw arbor motor, power = 2.2 kW, speed = 2800 rpm, Flange type = clamping flange, saw blade bore = 25.4mm, direction of rotation = left, shaft thread = right, Single-phase motor, voltage = 1 x 230 V (± 5% according to VDE...
From €302.53 net*
Saw Arbor Motor-4.0kW-KSD 74A2-Rotation right Saw Arbor Motor-4.0kW-KSD 74A2-Rotation right
Three-phase saw arbor motor, power = 4.0 kW, speed = 2850 rpm, Flange type = clamping flange, saw blade bore = 30mm, direction of rotation = right, shaft thread = left, Current = 8.19A, voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz...
From €312.34 net*
Saw Arbor Motor-5.5kW-KSD 81A2-Rotation right Saw Arbor Motor-5.5kW-KSD 81A2-Rotation right
Three-phase saw arbor motor, power = 5.5 kW, speed = 2880 rpm, Flange type = clamping flange, saw blade bore = 40mm, direction of rotation = right, shaft thread = left, Current = 10.5A, voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz...
From €444.19 net*
Saw Arbor Motor-5.5kW-KSD 81A2-Rotation left Saw Arbor Motor-5.5kW-KSD 81A2-Rotation left
Three-phase saw arbor motor, power = 5.5 kW, speed = 2880 rpm, Flange type = clamping flange, saw blade bore = 40mm, direction of rotation = left, shaft thread = right, Current = 10.5A, voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz...
From €513.19 net*
Saw Arbor Motor-7.5kW-KSD 81B2-Rotation right Saw Arbor Motor-7.5kW-KSD 81B2-Rotation right
Three-phase saw arbor motor, power = 7.5 kW, speed = 2890 rpm, Flange type = clamping flange, saw blade bore = 40mm, direction of rotation = right, shaft thread = left, Current = 13.6A, voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz...
From €538.54 net*
Saw Arbor Motor-7.5kW-KSD 81B2-Rotation left Saw Arbor Motor-7.5kW-KSD 81B2-Rotation left
Three-phase saw arbor motor, power = 7.5 kW, speed = 2890 rpm, Flange type = clamping flange, saw blade bore = 40mm, direction of rotation = left, shaft thread = right, Current = 13.6A, voltage = 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz...
From €607.54 net*
2 From 2

Circular Saw Motors from Stock

SEVA-tec GmbH specialises in solving challenges across the field of drive technology. Our focus lies on circular saw motors, three-phase motors, frequency inverts, and gear motors.

Circular Saw Motors – Designs

Circular saw motors in combination with a breaking device are used as saw motors, band saw motors, or circular saw motors. Depending on the desired application, our motors either have a right-hand or left-hand thread located at the shaft end. For 1.1kW-2.2kW the drives are available in the 230V version, and for 1.5kW, 2.2kW, 3kW, 4kW, 5.5kW, and 7.5kW they are available in the 400V version. In many cases, the flat converted electric motors are required to have customer-specific requirements. Here, a narrow design is crucial. The main application for this electric motor however is for a circular saw.

 

Circular Saw Motor with Saw Blade

Circular Saw Motor with Saw Blade

Power Capacity of Saw Motors

On this page, you will find circular saw motors in aluminium design in sizes 58-81 with a power output capacity of 1.1kW, 1.5kW, 1.8kW 2.2kW, 3.0kW, 4kW, 5.5kW, and 7.5kW.

Braking Units for Table Saw Motors

Electric brakes are utilised to decelerate both, asynchronous motors with a squirrel-cage design and 1PH AC capacitor start motors so that motion is stopped within 10 seconds after the motor is switched off. For external assembly, brake switches in 1,1kW – 7,5kW are available.

PTC Resistors / PTC Thermistors

The available flat drives have been prepared for temperature monitoring with positive temperature coefficient thermistor sensors (PTC). To use this monitoring system, you will need the corresponding PTC-resistor release device.

AC Motors - Operation Modes 

The offered operation mode of the circular saw motor is S6. Please find below a small guide of the common operation modes of electric motors:

Continuous Operation S1, Short Term Operation S2, Intermittent Operation S3 (without starting, without braking), Intermittent Operation S4 (with starting, without braking), Intermittent Operation S5 (with starting, with breaking), Continuous Operation S6 (with intermittent load), Reversing Operation S7 as well as Continuous Operation (with variable rotation speed).

SEO= Saw arbor motor 1.5, 2.2, 3, 4, 5.5 kW - Circular Saw Motors from Stock

 

Viewed