Protective roof size 160
Protective roof size 180
Protective roof size 200
Protective roof size 225
Protective roof size 250
Protective roof size 280
Protective roof (without hood) size 90
Protective roof (without hood) size 100
Protective roof (without hood) size 112
Protective roof (without hood) size 132
Rain protection for electric motors
SEVA-tec GmbH is your specialist in the professional drive technology field. The focus is on three-phase motors, frequency inverters and geared motors. You can order our drives as energy-saving motor(-s) in IE2 / IE3 and, upon request, also in IE4. In many cases, electric motors are needed which are designed to match specific requirements. In this respect, with our qualified personnel, our large stock of motors and our own final assembly, we are a perfect partner for businesses that need very different motor designs.
Electric Motor with rain cover
Sizes of protection roofs
The dimensions of the protection roofs correspond with the motor sizes. They are available in sizes of 56, 63, 71, 80, 90, 100, 112, 132, 160, 180, 200 and 225.
Electronic brake units
Electronic brakes are used to decelerate asynchronous motors with squirrel-cage rotor and 1PH AC capacitor start motors so that motion is stopped within 10 seconds after the motor is turned off. Brake switches are available for external installation in 1.1kW, 1.5kW, 2.2kW, 3kW. 4kW, 5.5kW and 7.5kW motors.
Protection by PTC thermistor
Most of the drives offered here are designed and prepared for temperature monitoring using PTC sensors. To make use of this monitoring function, you need the applicable PTC thermistor triggering device.
Construction type and terminal box
If desired, the construction type of the motors is variable. Even for AC motors in heavy design, i.e. from 4 kW to 500 kW, the feet of the motor can be modified. Hence, a B3 foot motor can also be converted to a B5 flange motor or to a B4/B5 foot/flange motor. Another advantage is that the drive system can be modified towards a system with terminal box at the top, on the left side, on the right side or even at the bottom.
Special motor designs
Here you see a selection of miscellaneous electric motor designs. These are, for example, electric motors / geared motors with:
- variable speed drive (inverter) mounted on the motor
- external fan
- different voltages
- different frequencies
- degree of protection of IP54, IP55, IP65, IP66
- UL/CSA with certificate
- marine grade steel body
- class of isolation H
- protection roof on the fan hood
- insulated ball bearings
- cable outlet
- special paint
- PTC resistor temperature sensor
- bimetal
- PTC thermistor
- temperature sensor such as PT 100
- bearing temperature monitoring
- heating during stoppage
- terminal box on the left side, right side, topside
- special flange
- special shaft
- second shaft end
- non-oxidizing aluminium fan
- non-oxidizing screws (D 086 DMA)
- rotary encoder
- tachogenerator
- incremental encoder
- NU bearing / fixed bearing
- prestressed bearing
- re-lubrication unit
- particular balancing quality
- motor switch mounted on the motor