Filter
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 5
No results were found for the filter!
SEVA-reducing ring SEVA-reducing ring
Reducing ring from 30mm to 25,4 - 1,8mm for Flat Motors KSx 58 - 63
€5.13 net*
Bremsspule 24V SEVA-brake coil-24V-DC
SEVA-brake coil-24V-DC
€61.09 net*
Anti-condensation heating 100-132 Anti-condensation heating 100-132
Anti-condensation heating sizes 100 - 132 are used for education to prevent condensation in the electric motor.
€121.39 net*
Anti-condensation heating 160-225 Anti-condensation heating 160-225
Anti-condensation heating sizes 160 - 225 are used for education to prevent condensation in the electric motor.
€157.28 net*
Anti-condensation heating 250-315 Anti-condensation heating 250-315
Anti-condensation heating sizes 250 - 315 are used for education to prevent condensation in the electric motor.
€172.14 net*
Anti-condensation heating 56-90 Anti-condensation heating 56-90
Anti-condensation heating sizes 56 -90 are used for education to prevent condensation in the electric motor.
€103.45 net*
SEVA- PTC tripping device SEVA- PTC tripping device
PTC tripping device, motor protection, PTC evaluation AC 50 / 60Hz 115 / 120V-230 / 240V + -10% 3VA, IP20, 1-9 PTC sensors according to DIN 44081 , DIN 44082 in series PTC tripping device, motor protection, PTC evaluation AC 50 / 60Hz...
€40.83 net*
NU-Lager SEVA-Cylindrical roller bearings BG160
Cylindrical roller bearing, A-sided. Reinforced bearing for electric motors of size 160. To absorb increased radial loads. Minimum load of 20% required!
€90.01 net*
NU-Lager SEVA-Cylindrical roller bearings BG180
Cylindrical roller bearing, A-sided. Reinforced bearing for electric motors of size 180. To absorb increased radial loads. Minimum load of 20% required!
€131.57 net*
NU-Lager SEVA-Cylindrical roller bearings BG200
Cylindrical roller bearing, A-sided. Reinforced bearing for electric motors of size 200. To absorb increased radial loads. Minimum load of 20% required!
€158.02 net*
NU-Lager SEVA-Cylindrical roller bearings BG250/280
Cylindrical roller bearing, A-sided. Reinforced bearing for electric motors of size 250 and 280 / 2 poles. To absorb increased radial loads. Minimum load of 20% required!
€231.46 net*
NU-Lager SEVA-Cylindrical roller bearings BG280/315
Cylindrical roller bearing, A-sided. Reinforced bearing for electric motors of size 280 / 4 poles. To absorb increased radial loads. Minimum load of 20% required!
€281.33 net*
1 From 5

Accessories for motors and gearboxes

Here you have the possibility to make use of our great choice of accessories to make your motor complete. You will find here, for example, the suitable torque support, double shaft, heating during stoppage, motor shaft, motor flange, thermal sensor, etc., for you drive system.


Electronic brake units

Electronic brakes are used to decelerate asynchronous motors with squirrel-cage rotor and 1PH AC capacitor start motors so that motion is stopped within 10 seconds after the motor is turned off. Brake switches are available for external installation in 1.1kW, 1.5kW, 2.2kW, 3kW. 4kW, 5.5kW and 7.5kW motors.


Protection by PTC thermistor

Most of the drives offered here are designed and prepared for temperature monitoring using PTC sensors. To make use of this monitoring function, you need the applicable PTC thermistor triggering device.


Construction type and terminal box

If desired, the construction type of the motors is variable.  Even for AC motors in heavy design, i.e. from 4 kW to 500 kW, the feet of the motor can be modified. Hence, a B3 foot motor can also be converted to a B5 flange motor or to a B4/B5 foot/flange motor. Another advantage is that the drive system can be modified towards a system with terminal box at the top, on the left side, on the right side or even at the bottom.


AC motors of special designs

Here you see a selection of miscellaneous electric motor designs. These are, for example, electric motors / geared motors with:
- variable speed drive (inverter) mounted on the motor
- external fan
- different voltages
- different frequencies
- degree of protection of IP54, IP55, IP65, IP66
- UL/CSA with certificate
- marine grade steel body
- class of isolation H
- protection roof on the fan hood
- insulated ball bearings
- cable outlet
- special paint
- PTC resistor temperature sensor 
- bimetal
- PTC thermistor
- temperature sensor such as PT 100
- bearing temperature monitoring
- heating during stoppage
- terminal box on the left side, right side, topside
- special flange
- special shaft
- second shaft end
- non-oxidizing aluminium fan
- non-oxidizing screws (D 086 DMA)
- rotary encoder
- tachogenerator
- incremental encoder
- NU bearing / fixed bearing
- prestressed bearing
- re-lubrication unit
- particular balancing quality
- motor switch mounted on the motor

SEO= Accessories for geared + electric motors, Accessories for motors and gearboxes

Viewed